| Killion / Davis-Standard, a worldwide technological leader, designs and manufactures extruders, extrusion systems and process controls for all thermoplastic and elastomer processes. Killion was founded in 1943. Unlike other laboratory extruders and equipment, the Killion extruder was designed to run 24/7. With the success of this equipment, Killion adopted the motto “Production rated Laboratory Equipment”. Killion opened what is probably the first Process Laboratory set up by an equipment manufacturer in 1963. In the 1970s under pressure from customers to provide more equipment they started manufacturing machinery for production systems. By the mid 1980’s, Killion was supplying “Turn Key” extrusion system for customers world wide. Today they are the foremost experts on specialist polymer extrusion applications and have the largest installed base of laboratory extrusion equipment. Davis Standard's Killion line of extruders has been the #1 selling small scale extruder for over 20 years. |
Davis Standard Feed Screws The critical component of any extruder is the feedscrew. If perfectly matched to your process, the result is optimum output and a quality product. Davis-Standard stays on the leading edge of screw technology with one of the most advanced design and manufacturing facilities in the world. All Davis-Standard feed screws are designed and manufactured right on the premises. Designs are based on individual customer extrusion parameters encompassing output rate, melt temperature, output consistency of extruder stability, melt homogeneity, melt quality, and power requirements. For single screw extruders, sizes range from 3/4-inch (20mm) to 12-inches (305mm) in diameter with virtually any L/D and can be designed to fit any manufacturer's extruders. The company has feedscrew designs to match the most unique process and compounds including their patented DSBM-T TM barrier feedscrew. |
Killion Laboratory modular coex extruder line. |
Killion co extruder sheet extrusion system. |
KL-100 Extruder Basic Killion Floor Model Extruder. Can be configured for use in blown film lines, cast or sheet extrusion. |
KLB-075 Extruder Killion Bench Top laboratory extruder. Available with stand and all options of floor model. |
KN-250 Extruder Basic robust extruder 2 1/2 inch floor model extruder. |
KTS-125 Co-extruder Killion Modular Co extruder for building multilayer extrusion line. |
Modular Cast Extrusion Line Example of Killion line with extruder and take off modules. |
Modular Cast Take Off System Killion laboratory extruder cast take off system. |
| Home |
 futurecan@saturn2.com
|
Contact Us |
Site best viewed at a resolution of 1024 x 768 pixels
This web site is maintained by Future Design Inc.
Copyright © 2004. All rights reserved.